<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T03:23:29Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/11745" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/11745</identifier><datestamp>2026-09-24T01:18:05Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor" lang="en_US">Tait, Michael</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author" lang="en_US">Foster, Andrew Douglas Barry</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Civil Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2014-06-18T16:56:32Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2014-06-18T16:56:32Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="created" lang="en_US">2011-12-21</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued" lang="en_US">2012-04</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="other" lang="en_US">opendissertations/6691</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="other" lang="en_US">7692</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="other" lang="en_US">2417390</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/11745</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/11468</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">&lt;p>Seismic isolation is a seismic design philosophy that aims to reduce the demand on structures as opposed to increasing their capacity to endure forces. Seismic isolation can be achieved by placing isolating bearings with relatively low stiffness compared to the structure itself beneath the superstructure. This low stiffness layer increases the structural period, shifting the structure into a period range of low seismic energy content.&lt;/p> &lt;p>The objectives of this research were to investigate the dynamic properties, durability and limitations of stable unbonded fibre reinforced elastomeric isolator (SU-FREI) bearings. Vertical compression testing indicated the bearings possessed adequate vertical stiffness. Due to lack of bonding at the bearing interface surfaces rollover deformation was observed to occur during lateral cyclic testing. This response behaviour was found to result in advantageous effective lateral stiffness and damping properties. The bearings maintained stability during rollout testing while serviceability and fatigue testing both conformed to code specified test specimen adequacy limitations. Experimental shake table testing showed that the isolated structure behaved essentially as a rigid body during testing. Test results showed that a SU‐FREI isolation system significantly reduced the seismic demand on the structure.&lt;/p> &lt;p>Modelling of the bearings dynamic properties was completed using a bilinear model and a backbone curve model. Both models showed adequate results in predicting experimental peak responses. A simplified design spectrum analysis was presented and used to model the structure in four Canadian cities. This design spectrum analysis approach showed adequate capabilities in predicting peak response values, such that the method could be used in preliminary analysis and design of isolated structures.&lt;/p></dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Master of Applied Science (MASc)</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Base isolation</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Isolation</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">FREI</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">SU-FREI</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Stable Unbonded Fibre Reinforced Elastomeric Isolator</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Civil Engineering</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Structural Engineering</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Civil Engineering</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">BASE ISOLATION USING STABLE UNBONDED FIBRE REINFORCED ELASTOMERIC ISOLATORS (SU-FREI)</dim:field>
   <dim:field mdschema="dc" element="type" lang="en_US">thesis</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>