<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T08:37:32Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/13021" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/13021</identifier><datestamp>2026-09-24T07:31:58Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor" lang="en_US">Ziada, Samir</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="advisor" lang="en_US">Marilyn F. Lightstone and James S. Cotton</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author" lang="en_US">Elsayed, Moh Manar F.</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Mechanical Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2014-06-18T17:01:55Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2014-06-18T17:01:55Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="created" lang="en_US">2013-05-22</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued" lang="en_US">2013</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="other" lang="en_US">opendissertations/7856</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="other" lang="en_US">8896</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="other" lang="en_US">4163118</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/13021</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/19596</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">&lt;p>This thesis investigates the effect of different passive suppression techniques of different configurations on the flow-excited acoustic resonance of an internal axisymmetric cavity. This type of acoustic resonance is observed in many practical applications such as valves installed in steam pipe lines, and gas transport system. An experimental setup of a cavity-duct system has been altered to facilitate the study of the suppression and/or delay of resonance over the range of Mach number of 0.07-0.4. Three different cavity depths have been studied d=12.5 mm, 25 mm, and 50 mm deep. For each depth, the cavity length is changed from L=25 mm to 50 mm. The investigation matrix includes the study of two rounding radii, two chamfer geometries and three different types of spoilers, all located at the leading edge of the cavity. A reference case of no suppression seat installed for each of the examined cavity geometries is tested. Rounding off cavity edges for both radii has increased the acoustic pressure level, yet delayed the onset of resonance. Chamfering the upstream edge of the cavity delayed the onset of resonance as a result of increasing the cavity characteristic length which delays the coupling of the shear layer perturbations and the acoustic field. The delay and the suppression of resonance achieved by the chamfer depend on the size of the cavity. All spoiler configurations have proven effectiveness in delaying and suppressing resonance for all cavities. The choice of spoiler configuration would depend on cavity size and robustness/strength of acoustic resonance.&lt;/p></dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Master of Science (MSc)</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Internal axisymmetric cavity</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">trapped modes</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">passive suppression</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">cavity flow</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">acoustic resonance</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Acoustics, Dynamics, and Controls</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Engineering</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Mechanical Engineering</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Acoustics, Dynamics, and Controls</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">EFFECT OF UPSTREAM EDGE GEOMETRY ON THE TRAPPED MODE RESONANCE OF DUCTED CAVITIES</dim:field>
   <dim:field mdschema="dc" element="type" lang="en_US">thesis</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>