<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T02:18:10Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/16650" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/16650</identifier><datestamp>2026-09-24T01:43:38Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Irons, Gordan A.</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author">Graham, Kevin James</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Materials Science and Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2015-01-21T20:54:16Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2015-01-21T20:54:16Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2008-11</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/16650</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/19056</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">The ladle metallurgical furnace (LMF) is a very flexible and common unit&#xd;
operation found in most steelmaking melt shops, and enables the adjustment and&#xd;
fine-tuning of molten steel's composition and temperature prior to casting.&#xd;
Despite the importance of ladle metallurgy to the overall steel making process&#xd;
very little has been achieved in the way of advanced ladle control. Limited&#xd;
sensors are available to monitor heat progress during refining and current control&#xd;
methods involve manual procedures. This thesis represents part of an ongoing&#xd;
study on the modelling of a full-scale LMF in real-time with the forward goal of&#xd;
improved control and optimization.&#xd;
The first part of this thesis details a vision-based sensor for analyzing ladle&#xd;
eye dynamics online using a multivariate image analysis (MIA) technique based&#xd;
on principal component analysis (PCA). Predictive capabilities of the developed&#xd;
model are demonstrated using previously published cold model data over a wide&#xd;
range of operating variables. Further, preliminary work has confirmed the ability&#xd;
of the sensor for potential use in an industrial setting. The second part of this&#xd;
study concerns the development of metallurgical models for assessing the state of&#xd;
a ladle metallurgical furnace. Specifically, a multi-component kinetic model in&#xd;
combination with developed slag and steel thermodynamic solution models were&#xd;
used to quantitatively describe the kinetics of slag-metal reactions within 41&#xd;
industrially sampled heats at ArcelorMittal Dofasco's LMF#2. Metal phase mass transfer coefficients for all elements in steel were assumed to follow the empirical&#xd;
relation derived from measured sulphur contents, while slag phase mass transfer&#xd;
coefficients were calculated by fitting the ratio of k^Mm/ k^MxOysl to the experimental&#xd;
results. On the basis of the fitted results, slag phase mass transfer coefficient&#xd;
correlations were evaluated using linear regression. Computed results from the&#xd;
model using these slag phase mass transfer coefficient correlations were found to&#xd;
be consistent with the experimental data. In regard to the developed&#xd;
thermodynamic solution models, original contributions to the modified interaction&#xd;
parameter formalism and cell model are presented. As process model predictions&#xd;
are invariably uncertain, the final part of this work involves the use of a stochastic&#xd;
model (extended Kalman filter) to account for process disturbances, model-mismatch&#xd;
and other sources of uncertainty that may result in significant error&#xd;
propagation causing poor process control and plant economics. Several case&#xd;
studies were performed to illustrate the effectiveness of the extended Kalman&#xd;
filter and its application to optimal sensor selection was introduced.</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degreetype" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Doctor of Philosophy (PhD)</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en_US">en_US</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">ladle metallurgical furnace (LMF), molten steel, integrated, multivariate image analysis (MIA),</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">Integrated Ladle Metallurgy Control</dim:field>
   <dim:field mdschema="dc" element="type" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>