<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T02:32:23Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/18016" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/18016</identifier><datestamp>2026-09-24T22:57:54Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Hutcheon, R. M.</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author">Harvey, Stanley Brooks</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Engineering Physics</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2015-09-09T19:40:14Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2015-09-09T19:40:14Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">1976-09</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/18016</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/9091</dim:field>
   <dim:field mdschema="dc" element="description" lang="en_US">This is Part B of the Thesis.</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">&lt;p> The design and performance of a flat emitting ring on-axis electron gun suitable for use in a small reflected beam accelerator was investigated. The design constraints include a low emittance (approximately 5π cm mrad), and a small beam size with a focus approximately 13 cm from the emitting surface.&lt;/p> &lt;p> A suitable geometry was determined theoretically and was tested with a dispenser cathode. A beam with a focus at 12.7 ± 1 cm and an emittance of approximately 7π cm mrad was obtained. However, the dispenser cathode response time to heater current changes is too large for the required gun current control.&lt;/p> &lt;p> Experiments were done to study the mechanical and thermal properties of flat emitting foil rings, since a directly heated foil has a fast response time. Two foils were tested: 1.27 x 10^-3 cm thick tungsten and 4.57 x 10^-4 cm thick tantalum. The present simple design requires impractically thin foils (≤ 0.25 microns thick) to reach emission temperatures at feasible heater currents.&lt;/p></dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degreetype" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Master of Engineering (MEngr)</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en_US">en_US</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">flat, ring, emitting, cathode, electron, currents, emission</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">A Study of Flat Ring Emitter Electron Guns (Part B)</dim:field>
   <dim:field mdschema="dc" element="type" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>