<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T01:57:30Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/19360" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/19360</identifier><datestamp>2026-09-24T04:25:03Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Elbestawi, M. A.</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author">Omar , Omar</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Mechanical Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2016-05-26T19:52:42Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2016-05-26T19:52:42Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2010-04</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/19360</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/23707</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">&lt;p> High-speed machining (HSM) concepts were developed in response to productivity,&#xd;
quality and cost concerns. Significant advancements in controls and machining technologies&#xd;
have recently come together to enable the wide spread use of HSM on the&#xd;
plant floor. However, with the advancement of HSM technology, dynamic problems&#xd;
associated with modern machine-tool structures have not been fully addressed and&#xd;
are currently limiting performance in some applications. &lt;p> A key aspect in the modelling of HSM processes is capturing the dynamics of&#xd;
the system during cutting. Machining over a wide range of rotational speeds necessitates&#xd;
the inclusion of many more higher modes in the system than traditionally&#xd;
considered. In addition many of the instruments used to assess performance such as&#xd;
force dynamometers are not designed to measure the cutting forces at high rotational&#xd;
speeds and hence the specific cutting force values being used are often times not being&#xd;
estimated properly. &lt;/p> &lt;p> Thus the focus of this research is to develop a new procedure for predicting&#xd;
the specific cutting forces in the end-milling process for high-speed machining. An&#xd;
improved mechanistic model to predict the specific cutting force using acceleration&#xd;
data captured from the workpiece fixture was developed. The development of the&#xd;
new procedure has also lead to an improvement in the extraction technique used to&#xd;
establish the modal parameters of a machining system. This new extraction technique&#xd;
was found to be more flexible and easier to use than other available techniques. &lt;/p> &lt;p> The new procedure was investigated to test the effect of choosing the number&#xd;
of modes of the improved modal parameters extraction technique on the estimation&#xd;
of the specific cutting force. The effect of filtrating the acceleration signal and the&#xd;
importance of including the run-out of the cutting tool in the model were also investigated. &lt;/p> &lt;p> The new procedure was tested on different setups and with different cutting force&#xd;
models. Experimental validation of the proposed estimation procedure was carried&#xd;
out, analyzed and compared to the open literature. The new procedure was found to&#xd;
be more accurate while being easier to implement. &lt;/p></dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degreetype" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Doctor of Philosophy (PhD)</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en_US">en</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">end milling</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">cutting force</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">productivity</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">mechanics</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">engineering</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">A New Procedure for Specific Cutting Force Assessment in High-Speed End Milling</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>