<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T02:44:01Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/19384" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/19384</identifier><datestamp>2026-09-24T18:45:38Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Wu, Peidong</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author">Wang, Huamiao</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Mechanical Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2016-05-30T18:24:31Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2016-05-30T18:24:31Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2010-09</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/19384</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/11639</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">&lt;P> There is a growing interest in magnesium and its alloys due to their high strength&#xd;
to weight ratio. Magnesium is of particular interest to the automotive industry as a&#xd;
consequence of the current pressure to reduce green house gas emissions from the&#xd;
transportation sector through vehicle weight reduction. However, there is a lack of&#xd;
knowledge concerning the formability of magnesium. As a result, the application of&#xd;
magnesium as a commercial material has not been fully exploited. Much has been learned&#xd;
from the constitutive modeling of materials such as aluminum and steel. Therefore, this&#xd;
thesis considers the constitutive modeling of magnesium and its alloys. &lt;/p> &lt;p> Based on this motivation, polycrystal plasticity theories that have been established&#xd;
and used to characterize aluminum and steel are studied. The validity of these theories is&#xd;
examined with respect to magnesium and its alloys. The magnesium system is composed&#xd;
of the hexagonal closed-packed (HCP) crystal structure. Therefore, a strong plastic&#xd;
anisotropy is induced in magnesium crystals due to the limited number of slip systems&#xd;
that may be activated with ease. The models proposed by Taylor and Sachs neglect strain&#xd;
and stress heterogeneities respectively. As a result, the models are either too stiff or too&#xd;
soft to study magnesium due to the anisotropic nature of the crystal structure. The&#xd;
intermediate models; self-consistent models, which are able to consider the&#xd;
heterogeneities among the grains in polycrystals, are believed to be more suitable to study&#xd;
magnesium and its alloys. Therefore, a large strain elastic-viscoplastic self-consistent&#xd;
(EVPSC) model is developed for polycrystalline materials. Both rate sensitive slip and&#xd;
twinning are included as mechanisms of plastic deformation, while elastic anisotropy is&#xd;
accounted for in the elastic modulus. The transition from single crystal plasticity to&#xd;
polycrystal plasticity is based on a completely self-consistent approach. It is shown that&#xd;
the differences in the predicted stress-strain curves and texture evolutions based on the&#xd;
EVPSC and the viscoplastic self-consistent (VPSC) model proposed by Lebensohn and&#xd;
Tome (1993) are negligible at large strains for monotonic loadings. For the deformations&#xd;
involving unloading and strain path changes, the EVPSC predicts a smooth elasto-plastic&#xd;
transition, while the VPSC model gives a discontinuous response because the model is&#xd;
incapable of modeling elastic deformation. In addition, it is demonstrated that the EVPSC&#xd;
model can capture some important experimental features which cannot be simulated by&#xd;
using the VPSC model. &lt;/p> &lt;p> Various self-consistent schemes exist for EVPSC and VPSC models. However,&#xd;
the evaluations of these models are not complete. Therefore, an examination of various&#xd;
polycrystal plasticity models is made, based on comparisons of the predicted and&#xd;
experimental stress responses as well as the R values, to assess their validity. It is&#xd;
established that, among the models examined, the self-consistent models with grain&#xd;
interaction stiffuess values halfway between those of the limiting Secant (stiff) and Tangent (compliant) approximations give the best results. Among the available options,&#xd;
the Affine self-consistent scheme results in the best overall performance. Furthermore, it&#xd;
is demonstrated that the R values under uniaxial tension and compression within the sheet&#xd;
plane show a strong dependence on the imposed strain. This suggests that the&#xd;
development of anisotropic yield functions using measured R values, must account for&#xd;
the strain. dependence. &lt;/p> &lt;p> The recently developed large strain elastic visco-plastic self-consistent (EVPSC)&#xd;
model, which incorporates both slip and twinning deformation mechanisms, is used to&#xd;
study .the lattice strain evolution in extruded magnesium alloy AZ31 under uniaxial&#xd;
tension and compression. The results are compared against in-situ neutron diffraction&#xd;
measurements done on the same alloy. For the first time, the effects of stress relaxation&#xd;
and strain creep on lattice strain measurements in respectively displacement controlled&#xd;
and load controlled in-situ tests are numerically assessed. It is found that the stress&#xd;
relaxation, has a significant effect on the lattice strain measurements. It is also observed&#xd;
that although the creep does not significantly affect the trend of the lattice strain&#xd;
evolution, a better agreement with the experiments is found if creep is included in the&#xd;
simulations. &lt;/p> &lt;p> In conjunction with the M-K approach developed by Marciniak and Kuczynski&#xd;
(1967), the EVPSC model is applied to study the sheet metal formability of magnesium&#xd;
alloys in terms of the forming limit diagram (FLO). The role of crystal plasticity models&#xd;
and the effects of basal texture on formability of magnesium alloy AZ31 B sheet are&#xd;
studied numerically. It is observed that formability in HCP polycrystalline materials is&#xd;
very sensitive to the intensity of the basal texture. The path-dependency of formability is&#xd;
examined based on different non-proportional loading histories, which are combinations&#xd;
of two linear strain paths. It is found that while the FLO in strain space is very sensitive&#xd;
to strain path changes, the forming limit stress diagram (FLSO) in stress space is much&#xd;
less path-dependent. It is suggested that the FLSO is much more favourable than the FLO&#xd;
in representing forming limits in the numerical simulation of sheet metal forming&#xd;
processes. The numerical results are found to be in good qualitative agreement with&#xd;
experimental observations. &lt;/p></dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degreetype" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Doctor of Philosophy (PhD)</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en_US">en</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">polycrystals</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">magnesium</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">green house gas</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">polycrystal plasticity</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">Constitutive Modeling of Hexagonal Close Packed Polycrystals</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>