<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T06:29:51Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/19417" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/19417</identifier><datestamp>2026-09-24T01:08:29Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">McDermid, Joseph R.</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author">Bellhouse, Erika M.</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Materials Science and Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2016-05-31T21:22:20Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2016-05-31T21:22:20Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2010-12</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/19417</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/21898</dim:field>
   <dim:field mdschema="dc" element="description" lang="en_US">Title: Galvanization of Al-Si TRIP-Assisted Steels, Author: Erika M. Bellhouse, Location: Mills</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">&lt;p>The high strength and ductility of TRIP-assisted steels makes them ideal for&#xd;
automotive lightweighting. However, to be used in automotive exposed parts galvanizing&#xd;
is essential to provide corrosion protection. Galvanizing of TRIP steels poses two major&#xd;
challenges: i) the heat treatment used to obtain the TRIP steel microstructure and&#xd;
mechanical properties is not necessarily compatible with the higher temperatures required&#xd;
for hot-dip galvanizing and ii) selective oxidation of the alloying elements used in TRIP&#xd;
steels; Mn, Si and Al, can result in bare spot defects and unacceptable coatings. Both of&#xd;
these issues have been investigated.&lt;/p>&#xd;
&lt;p>Heat treatments compatible with continuous hot-dip galvanizing were performed&#xd;
on two high Al - low Si TRIP-assisted steels; one having 1.5% Al and the other having&#xd;
1.0% Al and 0.5% Si. The effect of intercritical annealing (IA) temperature and&#xd;
isothermal bainitic transformation (IBT) time at 465 °C on the development of&#xd;
microstructure and mechanical properties was studied. It was determined that a sufficient&#xd;
quantity of stable retained austenite and an excellent combination of strength and&#xd;
ductility could be obtained using thermal cycles with a 465 °C IBT temperature. For the&#xd;
1.5% Al steel the best combination of strength and ductility was obtained for the thermal&#xd;
cycle using the 50% austenite (y) IA temperature and IBT times of 90 sand 120 s. For the&#xd;
IBT time of 90 s the tensile strength was 895 MPa and uniform elongation was 0.26. For the&#xd;
IBT time of 120 s the tensile strength was 880 MPa and uniform elongation was 0.27. For&#xd;
the 1.0% Al - 0.5% Si steel the best combination of strength and ductility was obtained forthe 50% y IA temperature and IBT time of 120 s. This thermal cycle resulted in a tensile&#xd;
strength of 1009 MPa and a uniform elongation of 0.22.&lt;/p>&#xd;
&lt;p>The effect of process atmosphere oxygen partial pressure on oxidation and&#xd;
reactive wetting during galvanizing was determined for four TRIP-assisted steels having&#xd;
varied Si and Al contents. Three different process atmospheres were studied for each&#xd;
alloy: a -53 °C dew point (dp) or-50 °C dp with N2 -20% H2 , a -30 °C dp with N2 - 5%&#xd;
H2 and a +5 °C dp with N2 - 5% H2 . The steel chemistry and oxygen partial pressure of&#xd;
the process atmosphere affected oxide chemistry and morphology. For all alloys the&#xd;
lowest oxygen partial pressure process atmosphere resulted in the highest concentration&#xd;
of Si at the surface (-53 °C dp or -50 °C dp) and the -30 °C dp process atmosphere&#xd;
resulted in the highest concentration of Mn at the surface. The predominant oxide&#xd;
morphology observed at the surface of the two high Al- low Si steels comprised filmtype&#xd;
oxides or irregular shaped nodules whereas the two high Si steels had an oxide&#xd;
morphology that generally comprised spherical cap shaped nodules.&lt;/p>&#xd;
&lt;p>Good wetting was obtained for all alloys when using two low oxygen partial&#xd;
pressure process atmospheres (-53 °C dp or -50 °C dp and -30 °C dp) and poor wetting&#xd;
was obtained for a higher oxygen partial pressure process atmosphere ( +5 °C dp ). At the&#xd;
+5 °C dp a considerably larger percentage bare area in the galvanized coating was&#xd;
obtained for the two high Si steels when compared to the two high Al- low Si steels. For&#xd;
the two high Si steels poor wetting at the +5 °C dp was attributed to the oxide&#xd;
morphology with closely spaced Mn-Si oxide nodules being observed at the surface ofthese steels. For the 1.5% Al steel and 1.0% Al - 0.5% Si steel the poor wetting was due&#xd;
to thick localized MnO films at the steel surface.&lt;/p>&#xd;
&lt;p>Despite selective oxidation observed at the surface for the -53 °C dp or -50 °C dp&#xd;
and -30 °C dp process atmospheres good reactive wetting was observed. For these&#xd;
processing conditions a number ofreactive wetting mechanisms were identified. When&#xd;
oxides remained at the steel/coating interface, the oxides could be bridged by the Zn&#xd;
overlay, Fe2Al5Znx or Fe-Zn intermetallics. Good wetting was also attributed to&#xd;
aluminothermic reduction of surface oxides by the dissolved Al in the Zn bath. For&#xd;
some processing parameters cracking of the oxide as a result of thermal stresses in the&#xd;
oxide imposed during cooling from the intercritical annealing temperature to the Zn bath&#xd;
temperature allowed the bath metal to reach the steel substrate, thereby improving&#xd;
wetting. Similarly, liquid infiltration of bath metal at the oxide/steel grain boundaries&#xd;
also contributed to good wetting on some samples. Lastly, in some cases wetting of the&#xd;
oxide was observed.&lt;/p></dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degreetype" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Doctor of Philosophy (PhD)</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">Galvanization of Al-Si Trip-Assisted Steels</dim:field>
   <dim:field mdschema="dc" element="type" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>