<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T02:02:28Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/19793" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/19793</identifier><datestamp>2026-09-24T03:36:36Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Harms, A.A.</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author">Molson, L.</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Engineering Physics</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2016-07-11T13:48:16Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2016-07-11T13:48:16Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">1974</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/19793</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/9255</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">&lt;p> Thick-film resistors are being used in the hybrid microelectronics&#xd;
industry. One characteristic that has been considered&#xd;
for the thick film resistor i s the reproduceability in resistor&#xd;
value associated with the production techniques employed in the&#xd;
reproduceability in resistor value associated with the production&#xd;
techniques employed in the resistor manufactured. &lt;/p> &lt;p> One parameter that has been associated with reproduceability&#xd;
is the yield figure; another parameter is the width of the resistance&#xd;
distribution for a given resistor production. These parameters&#xd;
can be used to identify the degree of reproduceability for the&#xd;
resistor production. A high yield figure or a small spread figure&#xd;
indicates a high degree of reproduceability. &lt;/p> &lt;p> The effect of aspect ratio and sheet resistivity on the reproduceability&#xd;
has been evaluated for paste system A. Aspect ratios of&#xd;
10, 5, 2 and 0.7 for a range of sheet resistivities (100, 1K, 10K,&#xd;
100K, and 1M ohms per square) were investigated. Results show that&#xd;
for a given aspect ratio the amount of variation in spread for the&#xd;
range of sheet resistivities is negligible within the limits of&#xd;
error in the experiment. For a given sheet resistivity, the variation&#xd;
in spread for the range of aspect ratios is considerable. The&#xd;
spread of an aspect ratio of 10 is 25 ± 4%. For an aspect ratio of&#xd;
0.7 the spread is 59± 7%. &lt;/p> &lt;p> The effect of resistor location on spread for a 2" x 2" substrate&#xd;
has been studied. Results indicate that a higher degree of&#xd;
reproduceability can be associated with resistors located near the&#xd;
central (1" x 1") region of the substrate than the resistors located near the perimeter. &lt;/p> &lt;p> The effect of increasing the resistor width on the reproduceability&#xd;
has been evaluated for resistors having aspect ratios near&#xd;
unity. Results show that as the resistor width is increased the&#xd;
spread in resistance decreases. For a width of 30 mil the spread&#xd;
in resistance is 37%. When the width is increased to 100 mil,&#xd;
the spread decreases to 21%. &lt;/p></dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degreetype" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Master of Engineering (MEngr)</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en_US">en</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">radiation</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">conversion</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Inhomogeneous Converters</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Reproduceability</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">thick film</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">Reproduceability Parameters in Thick Film</dim:field>
   <dim:field mdschema="dc" element="title" qualifier="alternative" lang="en_US">Radiation Conversion Enhancement with Inhomogeneous Converters</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>