<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T02:05:54Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/19797" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/19797</identifier><datestamp>2026-09-24T22:05:04Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Thompson, Michael</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Hrymak, Andrew</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author">Motlagh, Ghodratollah</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Chemical Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2016-07-11T15:49:03Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2016-07-11T15:49:03Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2007-09</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/19797</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/9176</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">&lt;p> An electrically conductive thermoplastic composite (ECTPC) consists of&#xd;
electrically conductive filler(s) at a concentration above percolation threshold&#xd;
distributed in an insulating polymer matrix. The high concentration of the filler&#xd;
required to achieve high electrical conductivity for ECTPC is usually&#xd;
accompanied with the deterioration of mechanical properties and a large increase&#xd;
in the viscosity which prevents feasible processing of these materials in common&#xd;
polymer processing equipments such as injection molding machinery. The initial&#xd;
focus of this work was to control these drawbacks by using combinations of&#xd;
conductive fillers namely carbon fiber (CF) and carbon black (CB) to create a&#xd;
hybrid-filler composite. Cyclic olefin copolymer (COC), an amorphous&#xd;
polyolefin, was used as the matrix material. It was found that carbon black and&#xd;
carbon fiber synergistically contribute to the transport of electrons through the&#xd;
matrix. The synergism exists at various filler concentrations including when one&#xd;
of the fillers was present below its percolation threshold, but not at high carbon&#xd;
fiber content. Results showed that where the concentration of CF was several fold&#xd;
higher than carbon black a good trade-off between viscosity and conductivity can&#xd;
be achieved so that the obtained composites can be reasonably processed tn&#xd;
common processing equipment e.g. in an injection molding machine &lt;/p> &lt;p> Carbon fiber is preferred to carbon black as it leads to ECTPC with higher&#xd;
electrical conductivity and lower viscosity. However, the high aspect ratio fibers&#xd;
preferentially align in the flow direction leading to ECTPCs which have electrical&#xd;
conductivity several orders of magnitude greater in the in-plane rather than&#xd;
through-plane. We focused on foaming as a strategy to reorient the fibers toward&#xd;
the through-plane direction in foam injection molding. Through a fractional&#xd;
factorial experimental design, the effect of injection rate, melt temperature and&#xd;
mold temperature on electrical conductivity was screened at two levels for foam&#xd;
and nonfoam COC/CF(lO vol%)-CB(2 vol%) injection molded composites. It was found that foaming significantly enhanced the through-plane fiber orientation and&#xd;
through-plane conductivity of the hybrid composite at low injection rate and high&#xd;
melt temperature. The concurrence of the melt flow and bubble growth was&#xd;
considered to be the key mechanism for fiber reorientation while the cell size and&#xd;
shape should not disrupt the conductive path spanning the bulk of the material. &lt;/p> &lt;p> The importance of the relative length scale of the fillers on cell size and&#xd;
subsequently, electrical conductivity was investigated by injection molding.&#xd;
Results showed that where the length scale of the filler was comparable to the cell&#xd;
size, as for foamed COC/CF composites, the conductivity considerably decreases&#xd;
with foaming. The drop was greater in the through plane direction and smaller in&#xd;
the in-plane direction for the composites with larger average fiber length. Also&#xd;
smaller cells led to a larger drop in the composite conductivity. It was observed&#xd;
that where the length scale of the filler was much smaller than the cell size as such&#xd;
for COC/CB composites, foaming enhanced the electrical conductivity&#xd;
particularly in the through-plane directions and its effects became more&#xd;
pronounced at lower carbon black concentrations. It was proposed that induced&#xd;
carbon black coagulation by foaming was the main reason for the observed&#xd;
improvement in conductivity. For COC/CF-CB hybrid composites, enhancement&#xd;
in through-plane conductivity, particularly at CB concentration below percolation,&#xd;
via foaming inferred that CB aggregates significantly contributed in improving&#xd;
fiber-fiber contacts. &lt;/p> &lt;p> Reorientation of the fibers by foaming was found to be very dependent on&#xd;
processing conditions. High viscosity and fiber- fiber interactions can hinder fiber&#xd;
rotation. The general understanding of the investigation was that fiber&#xd;
reorientation may occur where the cells are much larger than the fibers. In&#xd;
comparison, a series of nonfoam injection molded composites containing CF, CB&#xd;
and CF-CB were foamed in a batch process to avoid flow effects. The&#xd;
insignificant change in fiber orientation with foaming proved that fibers can not rotate by the growth of an adjacent cell in the absence of shear. Also, a large drop&#xd;
in electrical conductivity with foaming as compared to the foam injection molded&#xd;
composites suggested that particle relocalization can not occur in batch foaming. &lt;/p></dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degreetype" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Doctor of Philosophy (PhD)</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en_US">en</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Carbon Fiber</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Fiber Orientation</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Electrically Conductive</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Amorphous Thermoplastic</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">Carbon Fiber-Carbon Black Interaction and Fiber Orientation in Electrically Conductive Amorphous Thermoplastic Composites</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>