<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T04:29:17Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/20475" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/20475</identifier><datestamp>2026-09-24T07:10:48Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Hamed, Mohamed</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author">Ahmed, Ahmed Bekhit</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Mechanical Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2016-09-23T19:29:09Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2016-09-23T19:29:09Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2016</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/20475</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/20392</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">The current work presents a steady-state experimental study of nucleate and transition&#xd;
boiling under a planar water jet impinging on a flat horizontal copper surface. The&#xd;
maximum attained surface temperature is 560  C and the maximum wall heat flux is&#xd;
5 MW/m2. The boiling curves under the impinging jet have been obtained for 0.6 and&#xd;
0.7m/s jet velocity and 15  C of subcooling. The boiling curves are similar to flow&#xd;
boiling curves in the nucleate boiling regime. However, the curves are characterized&#xd;
by a region of constant heat flux (shoulder) in the transition boiling regime.&#xd;
The current work studies nucleate and transition impinging jet boiling. Determining&#xd;
the bubble size is essential for the heat flux estimation in the nucleate boiling regime.&#xd;
There are limited number of studies targeting bubble dynamics under impinging&#xd;
jets. The current study presents a new force balance for bubbles growing in the&#xd;
stagnation region for the nucleate boiling regime. The jet dynamics cause two more&#xd;
force components compared to the case of flow boiling: (1) an asymmetric bubble&#xd;
growth force for a moving fluid and (2) a pressure force caused by the jet stagnation.&#xd;
As the force balance depends on bubble growth rate, Zuber’s model for non-uniform&#xd;
temperature field has been found to best represent the current experimental data with&#xd;
different b values. b =  /7 has been found to best fit the data at the stagnation region&#xd;
and b = 5 /6 for the parallel flow region.&#xd;
In transition boiling, the existence of the shoulder phenomenon has been attributed&#xd;
to vapor pockets break-up and formation on the heated surface. Vapor break-up&#xd;
and formation has been observed using high speed imaging. A new wall heat flux&#xd;
partitioning model has been developed based on the current physical understanding.&#xd;
The model has two components of heat transfer. Each component has been assumed to&#xd;
have a weighted contribution to the total heat flux based on the degree of superheat.&#xd;
The components are based on two mechanisms observed during vapor break-up.&#xd;
The first mechanism is due to the interaction between the jet dynamics and the vapor&#xd;
pockets in the stagnation region. The second mechanism which is more frequent&#xd;
at higher temperatures is due to Rayleigh-Taylor instability. The instability of the&#xd;
liquid-vapor interface grows and liquid wets the surface in the form of liquid columns.&#xd;
The modeled wall heat flux follows the experimental boiling curve reasonably. The&#xd;
model has a normalized root mean square error (NRMSE) of 33%.&#xd;
The wall heat flux has been found to be dependent on the vapor break-up frequency.&#xd;
A micro-size fiber optic has been used to measure the vapor oscillation frequency on&#xd;
the boiling surface. The probe has been produced by a new etching technique to assure&#xd;
minimal interference with the vapor formation or break-up. Based on the collected&#xd;
data, the break-up frequency has been modeled.</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degreetype" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Doctor of Philosophy (PhD)</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en_US">en</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">Mechanistic Modeling of Jet Impingement Boiling</dim:field>
   <dim:field mdschema="dc" element="type" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>