<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T03:57:47Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/22850" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/22850</identifier><datestamp>2026-09-24T19:29:23Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Emadi, Ali</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author">Nalakath, Shamsuddeen</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Electrical and Computer Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2018-05-04T16:04:12Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2018-05-04T16:04:12Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2018</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/22850</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/8996</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">This thesis focuses on utilizing the persistent voltage vector injections by finite control&#xd;
set model predictive control (FCSMPC) to enable simultaneous estimations of&#xd;
both position and parameters in order to realize robust sensorless interior permanent&#xd;
magnet synchronous machine (IPMSM) drives valid at the entire operating region&#xd;
including no-load standstill without any additional signal injection and switchover.&#xd;
The system (here, IPMSM) needs to meet certain observability conditions to&#xd;
identify the parameters and position. Moreover, each combination of the parameters&#xd;
and/or position involves different observability requirements which cannot be&#xd;
accomplished at every operating point. In particular, meeting the observability for&#xd;
parameters and position at no-load standstill is more challenging. This is overcome&#xd;
by generating persistent excitation in the system with high-frequency signal injection.&#xd;
The FCSMPC scheme inherently features the persistent excitation with voltage vector&#xd;
injection and hence no additional signal injection is required. Moreover, the persistent&#xd;
excitation always exists for FCSMPC except at the standstill where the control&#xd;
applies the null vectors when the reference currents are zero. However, introducing&#xd;
a small negative d axis current at the standstill would be sufficient to overcome this&#xd;
situation.The parameter estimations are investigated at first in this thesis. The observability is analyzed for the combinations of two, three and four parameters and experimentally&#xd;
validated by online identification based on recursive least square (RLS) based adaptive&#xd;
observer. The worst case operating points concerning observability are identified and&#xd;
experimentally proved that the online identification of all the parameter combinations&#xd;
could be accomplished with persistent excitation by FCMPC. Moreover, the effect&#xd;
of estimation error in one parameter on the other known as parameter coupling is&#xd;
reduced with the proposed decoupling technique.&#xd;
The persistent voltage vector injections by FCSMPC help to meet the observability&#xd;
conditions for estimating the position, especially at low speeds. However, the&#xd;
arbitrary nature of the switching ripples and absence of PWM modulator void the&#xd;
possibility of applying the standard demodulation based techniques for FCSMPC.&#xd;
Consequently, a nonlinear optimization based observer is proposed to estimate both&#xd;
the position and speed, and experimentally validated from standstill to maximum&#xd;
speed. Furthermore, a compensator is also proposed that prevents converging to&#xd;
saddle and symmetrical (  ambiguity) solutions.&#xd;
The robustness analysis of the proposed nonlinear optimization based observer&#xd;
shows that estimating the position without co-estimating the speed is more robust&#xd;
and the main influencing parameters on the accuracy of the position estimation are d&#xd;
and q inductances. Subsequently, the proposed nonlinear optimization based observer&#xd;
is extended to simultaneously estimate the position, d and q inductances. The experimental&#xd;
results show the substantial improvements in response time, and reduction&#xd;
in both steady and transient state position errors.&#xd;
In summary, this thesis presents the significance of persistent voltage vector injections&#xd;
in estimating both parameter and position, and also shows that nonlinear&#xd;
optimization based technique is an ideal candidate for robust sensorless FCSMPC.</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degreetype" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Doctor of Philosophy (PhD)</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en_US">en</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Electric motor drives</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Position sensorless control</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Interior permanent magnet machine</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Parameter estimation</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Observability</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Model predictive control</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">Robust Position Sensorless Model Predictive Control for Interior Permanent Magnet Synchronous Motor Drives</dim:field>
   <dim:field mdschema="dc" element="type" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>