<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T00:49:00Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/23751" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/23751</identifier><datestamp>2026-09-24T20:06:06Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">McDermid, Joseph</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author">Nagaraj, Kishor</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Mechanical Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2019-01-16T15:31:48Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2019-01-16T15:31:48Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2018</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/23751</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/12448</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">Aluminum 7xxx series alloys have been a major focus for lightweight automotive &#xd;
structural components to achieve the targeted weight reductions by auto industries and, in &#xd;
turn, to increase the vehicle fuel efficiency. AA 7xxx series wrought alloy components &#xd;
have been widely used by the aerospace and automotive industries for many decades due &#xd;
to their low density and high strength. However, although near net shape casting of these &#xd;
alloys has many benefits versus wrought alloys; this processing route has been a &#xd;
challenge for the researchers and the auto industry because of limitations due to &#xd;
castability issues such as like hot tearing and die soldering. One possible mitigation &#xd;
strategy involves the addition of iron (Fe) as one of the major alloying element and then &#xd;
subsequently optimizing the alloy chemistry and solidification parameters in terms of die &#xd;
soldering. &#xd;
The objective of this thesis is to determine the microstructural evolution of any Al-Fe &#xd;
intermetallic phases with respect to cooling rate during solidification for a range of AA &#xd;
7xxx series alloy compositions. Fe was added at three different levels in a total of nine &#xd;
alloy composition developed from a Taguchi experimental matrix based on the &#xd;
interaction of three composition levels for four alloying elements. The alloys were cast &#xd;
using a custom built casting rig while the cooling rates were measured along the length of &#xd;
a directionally solidifying sample.  &#xd;
The thermocouple measurements were analyzed to determine the velocity of the &#xd;
solid/liquid interface, overall cooling rate and thermal arrest points for later correlation to &#xd;
variations in the microstructural development of any Al-Fe intermetallic phase particles &#xd;
present in the experimental alloys. Metallographic samples were taken at locations with &#xd;
&#xd;
 &#xd;
 &#xd;
 &#xd;
iv &#xd;
 &#xd;
known cooling rates to determine the resultant microstructure. Scanning electron &#xd;
microscopy (SEM) and energy dispersive X-Ray spectroscopy (EDS) were performed to &#xd;
obtain elemental analyses of the Al-Fe intermetallic phases for present in the samples. &#xd;
The Fe maps obtained by EDS were processed and analyzed using Image-J software to &#xd;
determine the size distribution and area fraction of the Al-Fe intermetallic phases as a &#xd;
function of alloy composition and solidification rates. Also, a regression analysis was &#xd;
used to develop a statistical model to predict the variation of intermetallic particle size &#xd;
and area fraction of the Al-Fe intermetallic phases as a function of alloy composition and &#xd;
cooling rate. &#xd;
Based on the experimental investigation and analysis of the nine Al 7xxx-Fe alloys the &#xd;
results can be summarized as follows: (1) Cooling rate has a strong influence on the &#xd;
chemistry and morphology of the Fe intermetallic particles: It was determined that the &#xd;
dominant intermetallic species changes from the equilibrium Al3Fe to the metastable &#xd;
Al6Fe alloys for cooling rates in excess of approximately10 °C/s. (2) Alloy cooling rate &#xd;
does significantly affect the area fraction of the Fe intermetallic particles. It was &#xd;
determined that the morphology of the Al-Fe particles transitions from a relatively low &#xd;
aspect ratio particles to a high aspect, needle-like particles for cooling rates less than &#xd;
approximately 10 °C/s. (3) Alloying elements such as Zn, Cu, and Mg does not influence &#xd;
the Fe intermetallic chemistry and the area fraction of the intermetallics.</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degreetype" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Master of Applied Science (MASc)</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en_US">en</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Microstructural Characterization</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">Microstructural Characterization of Al-Fe Intermetallics in  Aluminum Alloy 7xxx during Controlled Solidification</dim:field>
   <dim:field mdschema="dc" element="type" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>