<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T06:05:47Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/24998" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/24998</identifier><datestamp>2026-09-24T04:56:37Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Jain, Mukesh</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author">Oud, Cameron</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Mechanical Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2019-10-07T14:33:42Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2019-10-07T14:33:42Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2019</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/24998</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/8585</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">Sheet metal forming is a process in which sheet materials are stretched, &#xd;
drawn and bent into complex shapes by use of a forming press fitted with a &#xd;
die set and punch suitable for forming a part. There are several ways to form &#xd;
sheet including hot and cold stamping. If the material to be formed is ductile, &#xd;
commonly, the cold stamping process is utilized. However, if the material has &#xd;
low formability in its room temperature state, hot stamping can be employed &#xd;
to avoid fracture and significant part spring-back. In this thesis the hot &#xd;
stamping feasibility of aluminum AA7075-F (as-fabricated temper) was &#xd;
investigated. &#xd;
The formability of AA7075-F sheet was assessed for elevated &#xd;
temperature forming by means of the in-plane Marciniak test. Although &#xd;
common at room temperature, development of an elevated temperature &#xd;
Marciniak test was necessary. ABAQUS® FE suite was used to create an &#xd;
accurate finite element model (FEM) to assist in understanding material flow &#xd;
during experimental testing. Upon development of an elevated temperature &#xd;
Marciniak test, strain maps were produced through digital image correlation &#xd;
(DIC) to create forming limit curves (FLC). In addition, the resulting samples &#xd;
were observed for their microstructure, plastic flow, necking and fracture &#xd;
behaviour. Macroscopic strain field inhomogeneity, surface roughening &#xd;
characteristics, and ductile void damage as a function of strain, strain path &#xd;
and temperature were also analyzed in an attempt to correlate formability and &#xd;
fracture behaviour to the material microstructural, damage development and &#xd;
surface characteristics in the deformed state. &#xd;
FLC prediction of AA7075-F sheet were made using the laboratory-based &#xd;
FE simulation models of in-plane Marciniak test. For this purpose, strain-rate &#xd;
dependant data for AA7075-F sheet was obtained through elevated &#xd;
temperature tensile tests for use as material model input data. The predicted &#xd;
FLCs were compared with the experimental FLCs, and good general agreement &#xd;
was observed. &#xd;
Lastly, a die was designed to replicate the hot stamping die quenching &#xd;
process through forming annealed AA7075 sheet. Tensile samples were cut &#xd;
from hot stamped parts to evaluate the process feasibility. Supplementary &#xd;
tests were performed to evaluate the impact of cooling rate on material &#xd;
strength.</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degreetype" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Master of Applied Science (MASc)</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en_US">en</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">Formability of AA7075 Aluminum Sheet at Elevated Temperatures for Automotive Hot Stamping Applications</dim:field>
   <dim:field mdschema="dc" element="type" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>