<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T02:46:06Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/25384" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/25384</identifier><datestamp>2026-09-24T03:01:00Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Emadi, Ali</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author">Gareau, Jacob</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Electrical and Computer Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2020-04-17T09:37:11Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2020-04-17T09:37:11Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2020</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/25384</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/11684</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">In recent years, there has been a greater push to reduce green house gas emissions&#xd;
due to the looming threat of climate change. This has resulted in a shift towards&#xd;
more electrified transportation and as a result, reliance on renewable energy such as&#xd;
solar or wind and a decreased reliance on fossil fuels. Battery energy storage systems&#xd;
(BESS) have been one of the prevailing methods for storing electrical energy from&#xd;
intermittent energy sources due to their performance, cost and size. However, in order&#xd;
to interface BESS with the AC power grid, power electronics are a necessity. With&#xd;
this paradigm shift from fossil fuels to renewable energy, power electronics and their&#xd;
components have been a large focus of research in the scientific community. There has&#xd;
been a trend for continuous improvement of power electronic converter performance&#xd;
which has led to the desire for advances in semiconductor switches. Switches with&#xd;
lower power loss would allow power electronic systems to achieve higher efficiency and&#xd;
higher power density. Due to the continuous desire for improvement, researchers have&#xd;
begun to adopt Wide-bandgap (WBG) switching devices since silicon (Si) has been&#xd;
reaching its material limit and WBG devices offer improved performance. Silicon&#xd;
carbide (SiC) and gallium nitride (GaN) offer improved performance over Si, GaN in&#xd;
particular offers the fastest switching speeds and based on the device rating is well&#xd;
suited for medium power levels in BESS. Although the potential of GaN is known, it&#xd;
is a fairly new technology and therefore a full analysis of its loss behaviour is required&#xd;
in order to model the device. In addition, GaN requires advanced measurement&#xd;
technologies to analyze them due to the high frequency operation and tiny device&#xd;
parasitics. Before GaN can reach widespread adoption in power electronic converters,&#xd;
the detailed analysis of the theoretical loss breakdown of a GaN-based power electronic&#xd;
system and measurement is required.&#xd;
The incorporation of GaN into isolated DC/AC converters necessary for interfacing&#xd;
the AC grid with the DC battery has the potential to increase the power density&#xd;
and efficiency. However, incorporating GaN alone can not fix all the current problems&#xd;
in the conventional design approach of two-stage cascaded Dual-active bridge (DAB)&#xd;
and inverters. Typically, the DAB and inverter are connected through an intermediate&#xd;
DC bus which requires large and unreliable electrolytic capacitors to filter the&#xd;
ripple power, these capacitors reduce the life-time of the converter significantly.&#xd;
This thesis proposes a GaN based single-stage DC/AC converter which does not&#xd;
require the large electrolytic capacitors or additional devices to filter the ripple power.&#xd;
In order to control the converter, a combined duty and phase shift control method&#xd;
is used. The operating condition for each discretized voltage output is derived based&#xd;
on the calculation for the lowest power loss conditions.&#xd;
To further investigate the proposed control and use of GaN, a greater focus on&#xd;
gate driver and PCB design is needed to take advantage of the new WBG switching&#xd;
devices such as GaN HEMTs. As switching frequencies are continuously pushed&#xd;
higher and higher to improve the power density of converters, there is a need for&#xd;
extremely fast turn on and turn off times for FETs in order to minimize losses and&#xd;
maximize efficiency. However, large slew rates have a negative impact on the circuit&#xd;
because the small parasitics present in the device packaging and PCB traces are no&#xd;
longer negligible and can result in severe oscillations and voltage spikes that can lead&#xd;
to increased losses or even device failure. Analysis of gate driver design and potential&#xd;
issues for designing with GaN are presented before the prototype is presented and&#xd;
analysed.&#xd;
A single-stage isolated DC/AC converter using GaN is shown to provide superior&#xd;
performance compared with the traditional two-stage approach. Simulation comparisons&#xd;
of both converters reveal that the proposed topology greatly improves efficiency&#xd;
while also removing the intermediate DC bus which is known to cause reliability issues.&#xd;
The efficiency improvement is achieved through a proposed control scheme that&#xd;
determines the duty and phase shift for each discretized output voltage based on a&#xd;
weighting equation for minimum losses. The control scheme and converter behaviour&#xd;
are both validated through the use of a experimental prototype.</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degreetype" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Master of Applied Science (MASc)</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en_US">en</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">GaN Based Cycloconverter-Type Dual-Active Bridge Converter: Control, Design, Analysis, and Experimental Verification</dim:field>
   <dim:field mdschema="dc" element="type" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>