<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T08:38:39Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/25431" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/25431</identifier><datestamp>2026-09-24T06:18:38Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Phillion, Andre</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author">Khodaei, Niloufar</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Materials Science and Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2020-05-08T19:35:22Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2020-05-08T19:35:22Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2020</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/25431</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/8082</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">Hot tearing is one of the most severe defects encountered in direct chill (DC) casting&#xd;
of aluminum alloys and is intimately linked with the constitutive behavior of the&#xd;
alloy in the semi-solid region. The experimental studies in this  field are limited due&#xd;
to the high temperature at which hot tears form and the sensitivity of factors that&#xd;
cause hot tearing to the casting geometry; thus, modeling of the DC casting process&#xd;
at the macroscopic scale has become a popular practice in industry. However, such&#xd;
models do not consider the localization of deformation and liquid feeding between the&#xd;
grains that cause cracking. In this study, a new multi-scale approach to predicting the&#xd;
hot tearing defect in DC casting is proposed. In this approach, a thermomechanical&#xd;
model of the DC casting process has been coupled with a meso-scale coupled hydro-mechanical granular model. The thermomechanical model predicts the evolution&#xd;
of temperature distribution and displacement  field for all locations within the DC&#xd;
cast billet for three different simulation cases with casting speeds of 46 mm/min, 56&#xd;
mm/min, and 66 mm/min. Then, its output is used as input to the coupled meso-scale&#xd;
hydro-mechanical granular model to investigate the effect of different parameters&#xd;
on the tensile behavior of the mushy zone. The results show that the multi-scale&#xd;
approach can successfully simulate hot tearing formation at the regions in the DC&#xd;
cast billet which were found to be susceptible to hot tearing. Moreover, hot tearing susceptibility maps generated by this approach reveal that for the three DC casting&#xd;
simulations performed, the condition for hot tearing formation is favorable above the&#xd;
bottom block and near the center-line of the billet and as the casting speed increases,&#xd;
this region shifts to lower heights in the billet and a greater region becomes prone to&#xd;
hot tearing.</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degreetype" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Master of Applied Science (MASc)</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en_US">en</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">A STUDY ON HOT TEARING IN DIRECT CHILL CASTING OF ALUMINUM ALLOYS USING A MULTI-SCALE APPROACH</dim:field>
   <dim:field mdschema="dc" element="type" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>