<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T01:35:27Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/26907" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/26907</identifier><datestamp>2026-09-24T00:27:47Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Narimani, Mehdi</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author">Abuelnaga, Ahmed</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Electrical and Computer Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2021-09-27T15:50:28Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2021-09-27T15:50:28Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2021</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/26907</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/22729</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">High power converters are widely used in many industries. At power levels in the&#xd;
range of Mega Watt (MW), power conversion at medium voltage (MV) is preferred&#xd;
due to better efficiency and lower cost. For medium voltages applications,&#xd;
multilevel converters are widely adopted due to the features they offer with respect&#xd;
to two-level converters. Cascaded H-bridge topology is a widely adopted multilevel&#xd;
topology because of its modularity, scalability, and reliability. The conventional&#xd;
cascaded H-bridge topology allows two-quadrant operation. In order to allow fourquadrant&#xd;
operation, an active front end version of the cascaded H-bridge topology&#xd;
has been proposed in literature and recently commercialized.&#xd;
In the field, power converters operates under harsh loading and&#xd;
environmental conditions. The resulting stresses imposed on converter components&#xd;
cause their gradual degradation. In cascaded H-bridge converters, typically power&#xd;
cell components such as power modules, DC-bus capacitors, and control PCBs are&#xd;
v&#xd;
highly stressed. Under these stresses power cell components degrade and require&#xd;
replacement in the field, otherwise unexpected failures may occur.&#xd;
The thesis aim is to address power cell components reliability through&#xd;
proposing novel regenerative cascaded H-bridge converter control schemes to reduce&#xd;
components stresses and failure probability without increasing size, cost, or&#xd;
complexity. First, a novel PWM active front end control scheme has been proposed&#xd;
to reduce the inherent ripple current stresses on the DC-bus capacitors. Second,&#xd;
the thesis proposes a novel grid or near grid switching frequency front end control&#xd;
scheme to reduce stresses on power modules and the power cell cooling&#xd;
requirements. Third, novel cascaded H-bridge front end control schemes are&#xd;
proposed to reduce the sensor count, thereby decreasing failure rate and cutting&#xd;
down cost. The proposed work has been thoroughly validated through detailed 9-&#xd;
cell regenerative cascaded H-bridge system simulation and experimentation.</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degreetype" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Doctor of Philosophy (PhD)</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en_US">en</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Medium Voltage Motor Drives</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Cascaded H-Bridge Multilevel Inverters</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Reliability</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Regeneration</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">Reliability Improvement of Regenerative Cascaded H-bridge (CHB) Medium-Voltage Drive</dim:field>
   <dim:field mdschema="dc" element="type" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>