<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T04:23:55Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/27411" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/27411</identifier><datestamp>2026-09-24T04:54:00Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Thompson, Michael</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Vlachopoulos, John</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author">Akhtar, Mohammad</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Chemical Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2022-03-11T13:53:13Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2022-03-11T13:53:13Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2022</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/27411</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/13135</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">A novel strategy was considered in this work to improve the physical properties of rotationally molded parts formed using a thermodynamically immiscible physical blend of high-density polyethylene (HDPE) and polyamide 11 (PA11). Morphology of the melted system of the two polymers dry-mixed in the mold was dictated by the selected non-ionic surface-active agents. Through a preliminary evaluation of numerous non-ionic surfactants, Span 85 and Tween 20 showed the most promise at concentrations between 0.1 - 1.0 wt% for influencing how the two polymers spread over the mold surface in a uniaxial rotational molding unit; the two surfactants demonstrated favourable interparticle cohesion at 235 °C and were chosen on the basis of investigating the hydrophilic-lipophilic balance (HLB) as a predictive metric for polymer migration during rotomolding. For a comparison to a more traditional (and expensive) approach of preparing a molded part with blends of these two polymers, extrusion-mixed blends were first compounded using a twin-screw extruder, pelletized, ground, and finally rotomolded. The good compatibility of the two constituent polymers with Tween 20 was demonstrated by decreasing zero-shear viscosities with increasing surfactant concentration. In the molded samples, porosity for 50/50 dry-mixed blends increased at low concentrations of Tween 20, but ultimately the surfactant demonstrated its beneficial nature on sintering with a downward trend observed in porosity with increasing surfactant concentration; molded samples with 1.0 wt% Tween 20 showed a 1% improvement in porosity relative to uncoated blends, whereas 1.0 wt% Span 85 coated blends showed an undesirable increase in porosity instead. Similar trends were observed for 75/25 dry-mixed blends, except that the porosities for all Tween 20 concentrations were lower than those of uncoated blends. Low porosities were observed for all extrusion-mixed blends (with or without 1.0 wt% Tween 20) relative to the dry-mixed blends. As more favourable results for this new approach, Tween 20 coated dry-mixed blends showed an increase in impact strengths for both blend ratios, whereas extrusion-mixed blends showed a drastic decrease instead. Conversely, the inverse trend was found with flexural strengths. The results were reconciled through morphological analysis of the molded samples which demonstrated that a moderate degree of polymer migration occurred (i.e. aggregation of PA11 at the wall boundaries and HDPE near the centre) in the presence of the surfactant for 50/50 dry-mixed blends, whereas observations for the 75/25 blends were inconclusive. Therefore, based on the observations for density/porosity, impact strength, flexural strength, and morphology (i.e. polymer migration) modifying the blend-ratio, mixing strategy, and surfactant concentration for rotomolded HDPE-PA11 physical blends enables us to reliably predict and control the polyblends’ resultant properties and cater them to meet the requirements of a wide range of unique and specific use-case scenarios.</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degreetype" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Master of Applied Science (MASc)</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en_US">en</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">Investigating the Efficacy of Non-Ionic Surfactants as Compatibilizing Agents for Polyethylene-Polyamide Sintered Polymer Blends</dim:field>
   <dim:field mdschema="dc" element="type" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>