<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T01:38:22Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/32248" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/32248</identifier><datestamp>2026-09-24T04:04:14Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Koshy, Philip</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author">Rimac, Luke</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Mechanical Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2025-08-26T19:24:30Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2025-08-26T19:24:30Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2025</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/32248</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/17494</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">The work done in this thesis delves into the seldom discussed phenomenon of snaking&#xd;
 chatter in the grooving process. Snaking chatter differs from the typical diametrical&#xd;
 chatter in grooving as it arises from tool vibration in the lateral or axial direction&#xd;
 of the workpiece, causing a characteristic sinuous groove profile. This causes an&#xd;
 inconsistent increase in groove width over its nominal value, often exceeding tolerance&#xd;
 limits in precision engineering applications. Contrary to the suggestion put forth in&#xd;
 the current literature which attributes snaking chatter to mode coupling, this thesis&#xd;
 proposes the alternative hypothesis that it is the result of regenerative action upon&#xd;
 the side walls of the groove. This is conclusively proven by a series of experiments&#xd;
 as well as examination of the chatter marks left on the side walls of the machined&#xd;
 groove. Diametrical chatter and snaking chatter are shown to be mutually exclusive,&#xd;
 and the use of a tuned-mass damper equipped tool, designed to eliminate diametrical&#xd;
 chatter, enables snaking chatter to occur instead. Conventional stability lobe theory&#xd;
 was adapted for use in snaking chatter, which showed that the infeed required to&#xd;
 mitigate snaking chatter was too low and in the ploughing regime, and therefore&#xd;
 not a practical solution. Due to this, a counter-intuitive mitigation strategy was&#xd;
 developed which not only eliminates the issue of snaking chatter in grooving but also&#xd;
 increases material removal rate by 450%.</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degreetype" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Master of Applied Science (MASc)</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="layabstract" lang="en_US">Chatter is the vibration of the tool relative to the workpiece in machining, which&#xd;
 leaves marks, waves, or imprints on the workpiece. Grooving is a machining process&#xd;
 where a tool is fed into a rotating (usually cylindrical) workpiece normal to its axis of&#xd;
 rotation. Typically the chatter that occurs in grooving, called diametrical chatter, is&#xd;
 caused by unwanted tool deflection in the feed direction, leaving chatter marks which&#xd;
 affect the circumference of the groove. This thesis deals with an uncommon type of&#xd;
 chatter in grooving, called snaking chatter, which is the result of tool vibrations along&#xd;
 the axial direction of the workpiece, leaving a sinuous pattern on the machined groove&#xd;
 which resembles the slithering motion of a snake. The work in this thesis involves&#xd;
 the characterization, analysis, and development of mitigation strategies for snaking&#xd;
 chatter, one of which also increases productivity by 450% compared to the state of&#xd;
 the art.</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en_US">en</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">chatter</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">grooving</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">mode coupling</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">regeneration</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">Snaking Chatter: Characteristics and Mitigation</dim:field>
   <dim:field mdschema="dc" element="type" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>