<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T01:11:33Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/32307" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/32307</identifier><datestamp>2026-09-24T05:13:07Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Bauman, Jennifer</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author">Ali, Orges</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Electrical and Computer Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2025-09-17T17:15:40Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2025-09-17T17:15:40Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2025</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/32307</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/21244</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">In 2022 the transportation sector was the largest source of direct greenhouse gas &#xd;
(GHG) emissions in the US, with medium and heavy-duty trucks representing the second &#xd;
highest GHG emitting vehicle category [1]. Fuel cell hybrid electric trucks (FCHETs) are &#xd;
emerging as a promising solution for the electrification of Class 8 long haul transportation. &#xd;
However, further investigation is required into how to optimize the electrical powertrain of &#xd;
FCHETs. In this thesis, a detailed Class 8 FCHET model is created in MATLAB/Simulink. &#xd;
The electrical powertrain components are modeled using equations that are presented. The &#xd;
model is used to investigate partial power processing topologies for the fuel cell DC/DC &#xd;
converter, the optimal DC-link voltage, and the optimal battery connection topology for &#xd;
Class 8 FCHETs. All the investigations are conducted for SiC and IGBT semiconductor &#xd;
devices, aside from the partial power processing investigation which is only conducted for &#xd;
SiC semiconductor devices. &#xd;
Partial power processing (PPP) converter topologies have been proposed as more &#xd;
efficient and compact alternatives to conventional converters for certain applications, &#xd;
however no investigation has been conducted for the fuel cell DC/DC converter in a Class &#xd;
8 FCHET. In this thesis, detailed simulations are created to compare the performance of &#xd;
various PPP DC/DC converter topologies to the conventional boost converter. Efficiency &#xd;
maps and power loss breakdowns for multiple PPP DC/DC converter topologies are created &#xd;
using PLECS. Then, the performance of the fuel cell DC/DC converter topologies are &#xd;
assessed with an FCHET vehicle model created in MATLAB/Simulink. The results show &#xd;
that for a 400 V DC-link, the PPP FB converter is slightly more efficient than the boost &#xd;
converter, and for an 800 V DC-link, the PPP FB and PPP DAB converters are slightly &#xd;
more efficient than the boost converter.&#xd;
After considering the results of the PPP investigation, the subsequent DC-link &#xd;
voltage and battery connection topology optimization was conducted with a conventional &#xd;
boost converter for the fuel cell (FC) DC/DC converter, due to the simplicity of the &#xd;
topology and since the PPP DC/DC converters did not show significantly improved &#xd;
efficiency. The FC DC/DC converter is implemented step-up the fuel cell voltage, which &#xd;
allows the other electrical components (inverter, motor) to operate at higher efficiencies. &#xd;
However, a higher voltage gain generally causes a boost converter to operate at a lower &#xd;
efficiency due to higher conduction losses from a higher duty cycle, and higher switching &#xd;
losses which are a function of the output voltage. Thus, this presents an optimization &#xd;
problem: how high should the boost converter boost the fuel cell voltage to maximize the &#xd;
efficiency benefit for other electrical components and minimize the efficiency disadvantage &#xd;
for the boost converter? The DC-link voltage optimization results show that for the &#xd;
topology without DC-link voltage regulation, 800 V is the optimal nominal battery voltage &#xd;
for the SiC implementation, and 600 V is the optimal nominal battery voltage for the IGBT &#xd;
implementation. Additionally, the SiC implementation of this model is 4.5% more efficient &#xd;
than the IGBT implementation. &#xd;
An efficiency comparison is performed between an FCHET model without DC-link &#xd;
voltage regulation (battery connected directly to the DC-link), an FCHET model with &#xd;
constant DC-link voltage regulation, and an FCHET model with a variable DC-link voltage&#xd;
regulation, for various switching frequencies. The investigation results showed that the &#xd;
FCHET topology without DC-link voltage regulation was more efficient for all switching &#xd;
frequencies investigated and for both SiC and IGBT semiconductor devices, although only &#xd;
marginally in some cases. Thus, this thesis has made substantial contributions to the optimal &#xd;
design of Class-8 fuel cell hybrid trucks through the investigation of PPP topologies, &#xd;
electrical architecture, and optimal DC-link voltage. The conclusions can be used by &#xd;
FCHET manufacturers to streamline their design process by quickly narrowing in on &#xd;
proven optimal designs.</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degreetype" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Master of Applied Science (MASc)</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso" lang="en_US">en</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">optimal DC-link voltage</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">fuel cell hybrid electric truck</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">variable DC-link voltage</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">vehicle model</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">power electronics</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">partial power processing</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">DC/DC converters</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">Investigation of Optimal Class-8 Fuel Cell Hybrid Electric Truck Design for Improved Fuel Economy</dim:field>
   <dim:field mdschema="dc" element="type" lang="en_US">Thesis</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>