<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T01:38:23Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/33889" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/33889</identifier><datestamp>2026-10-27T07:11:48Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor">Kitai, Adrian</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author">Zhang Tingwei</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department">Materials Science and Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2026-10-26T18:07:48Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued">2026</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://hdl.handle.net/11375/33889</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/25658</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract">This thesis focuses on defect-induced fluorescence in two technologically important materials: silicon carbide (SiC) and quartz (SiO2). The specific choice of the materials arose since SiC has a great industrial potential as one of the third-generation semiconductors and SiC is often either naturally or intentionally terminated with SiO2.
The goal has been to study how their optical properties change in response to treatments using various characterization techniques. Focusing primarily on 4H-SiC, methods including etching, microindentation, nanoindentation, oxidation and electron irradiation were used to modify the surface and bulk properties of these materials. The materials science and underlying mechanisms behind these studies will be discussed in Chapters 1 and 2. 
Chapter 2 will also give a detailed review of how some of the above techniques can be applied unconventionally for the purpose of introducing optically active defects, with examples discussed in later Chapters.
In Chapter 3, stacking faults were induced in a SiC junction transistor by mechanically deforming the material through nanoindentation at the area of interest, followed by forward biasing. This work is the first to demonstrate the capability of spatially targeted generation of defects such as stacking faults which exhibit quantum confinement effects in a junction transistor using these two techniques in combination. 
The next two chapters will demonstrate how fluorescence can be induced by electron irradiation on the sample surface using a standard SEM system. These studies began with a coincidental observation: a naturally oxidized porous silicon carbide sample exhibited strong fluorescence after SEM examination. With detailed analysis and learnings gained from an extensive literature review as presented in Chapter 2, it was confirmed that SEM-induced radiolysis was the cause of the phenomenon.
Chapter 4 and 5 will also discuss how up-to-date confocal microscopy was used to spatially confirm the irradiation-induced fluorescence, which is relatively new to the field. The use of SEM to induce optically active defect states in materials is also quite distinctive compared to most studies of irradiation-induced damage, where samples are typically treated with MeV electron beams in a TEM or accelerator rather than keV level beam irradiation in an SEM. 
It is well known that conductive coatings protect beam sensitive materials from irradiation-induced damage during SEM examination. In this thesis, this protective effect of a carbon coating on quartz is confirmed for the first time using a combination of confocal PL and XPS analysis. Specifically, irradiation-induced fluorescence was quenched, and no new bonding configurations were observed after prolonged beam irradiation on the coated quartz wafer as described in Chapter 5. 
Finally, in the last two chapters, a summary of the work is given, and some new directions are proposed that may be useful for researchers working in similar field.</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degreetype">Thesis</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree">Doctor of Philosophy (PhD)</dim:field>
   <dim:field mdschema="dc" element="language" qualifier="iso">en</dim:field>
   <dim:field mdschema="dc" element="rights" lang="en">Attribution 2.5 Canada</dim:field>
   <dim:field mdschema="dc" element="rights" qualifier="uri">http://creativecommons.org/licenses/by/2.5/ca/</dim:field>
   <dim:field mdschema="dc" element="title">Effect of surface treatments to the optical properties of silicon carbide and silica</dim:field>
   <dim:field mdschema="dc" element="type" lang="en">Thesis</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>