<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T05:09:37Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/5687" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/5687</identifier><datestamp>2026-09-24T21:30:02Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor" lang="en_US">Duncan, J.L.</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author" lang="en_US">Ragab, Abdel-Rahman A.F.</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Mechanical Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2014-06-18T16:32:39Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2014-06-18T16:32:39Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="created" lang="en_US">2009-08-05</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued" lang="en_US">1973-06</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="other" lang="en_US">opendissertations/1033</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="other" lang="en_US">1565</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="other" lang="en_US">925317</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/5687</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/14762</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">&lt;p>Superplasticity is a hot-working phenomenon exhibited by many metallic alloys and observed above a temperature of about 40% of the absolute melting point. It is characterized by an ultra-fine grain microstructure, an unusually high rate dependence and very low resistance to deformation at low strain rates.&lt;/p> &lt;p>The plasticity theories and constitutive equations used in the analysis of secondary creep in structures are shown to be formally applicable to the study of superplastic deformation. A non-linear viscous model, with certain limitations, is employed to analyze superplastic deformation problems.&lt;/p> &lt;p>This thesis presents three separate and independent pieces of work. These problems namely; (a) analysis of post-necking geometry in tensile-forming processes, (b) creep testing of superplastic material in sheet form and (c) reverse-extrusion of rate-dependent materials, represent in the author's opinion three most important problems relating to the use of superplastic alloys in industry.&lt;/p> &lt;p>In tensile forming processes of superplastic alloys the deformation is unstable and it is shown that geometric non-uniformities develop continuously. The features of such deformation system are illustrated by the numerical analysis of initially non-uniform, tensile bars and thin-walled tubes expanded by internal pressure. Experimental results obtained from testing zinc-aluminum alloy are compared with the numerical results and satisfactory correlation is observed.&lt;/p> &lt;p>A technique is presented for obtaining creep data for superplastic sheets using a test in which a strip or indeed the whole sheet is arranged as a cantilever loaded by its own weight. Theory is given for deriving stationary creep parameters from measured deflection rates and for determining a stress, strain-rate curve using the skeletal point method. Tensile and bending creep tests were performed on superplastic zinc-aluminum sheets at room temperature and the creep data from both types of tests are compared.&lt;/p> &lt;p>In bulk forming of rate-dependent materials the load requirement are highly dependent on the forming speed. In the present work the traditional analytical method of slip-line field analysis has been extended to accommodate the extrusion of rate-sensitive materials such as superplastic alloys. The volume of the deformation zone and the effective mean strain-rate identified by the slip-line field solutions were incorporated to define a geometric factor which permits the extrusion pressure to be determined for a non-linear viscous material. Experimental results on reverse-extrusion of both as-cast and superplastic zinc-aluminum agree well with theoretical analysis.&lt;/p></dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Doctor of Philosophy (PhD)</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Mechanical Engineering</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Mechanical Engineering</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">Rate-Dependent Mechanics of Superplastic Processes</dim:field>
   <dim:field mdschema="dc" element="type" lang="en_US">thesis</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>