<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T01:19:15Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/5692" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/5692</identifier><datestamp>2026-09-24T22:26:30Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor" lang="en_US">Thompson, D.A.</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author" lang="en_US">Ibrahim, Mahmoud Ahmad</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Electrical Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2014-06-18T16:32:40Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2014-06-18T16:32:40Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="created" lang="en_US">2010-05-19</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued" lang="en_US">1986-08</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="other" lang="en_US">opendissertations/1039</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="other" lang="en_US">2662</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="other" lang="en_US">1319211</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/5692</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/8232</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">&lt;p>This thesis is concerned with investigating the production of thin film Bi-Sb alloys by ion beam mixing. Samples were composed of a thin Sb film sandwiched between two Bi layers; the thicknesses of the films were varied to produce composition range from 0 to ~45% Sb. The overall thickness was about 55 nm.&lt;/p> &lt;p>Analysis of the films by Rutherford Backscattering Spectrometry (RBS) and Auger Electron Spectroscopy (AES) indicated that ion beam mixing can produce uniform Bi-Sb alloys with doses of about 2.8X10¹⁵ cmˉ² of 80 KeV Ar⁺ at room temperature. The results of Electron Microscopy showed a grain growth due to ion bombardment.&lt;/p> &lt;p>The mixing was characterized by the increase in the full width at half maximum (FWHM) of the Sb signal in the RBS spectra. It was measured as a function of ion dose, dose rate, mass, and energy. The dependence of mixing on the temperature was also investigated. A square-root dependence of mixing on the dose confirmed a diffusion like mixing process. The rate of mixing per ion dose was found to increase with the elastic energy deposited at the Bi/Sb interface. The mixing is temperature independent in the range of ~40 to ~266 K, i.e., collision cascade mixing dominates. An effective diffusion coefficient, D*, of about 4.9X10ˉ²⁸cm⁴/ion was determined. At temperatures higher than ~266 K, the mixing increases with the temperature. This suggests that a radiation enhanced diffusion mechanism is the dominant mixing process. An effective diffusion coefficient of ~1.7X10ˉ²⁷cm⁴/ion at room temperature was calculated: an activation energy of ~0.15 eV was found.&lt;/p> &lt;p>Thermoelectric characteristics of the alloys were investigated by measuring the thermal voltage, V₃, as a function of the temperature, T, in the range 300-500 K, for alloys with various composition. The thermal voltage was found to have a linear dependence on temperature. The thermoelectric power, dV₃/dT, reaches a maximum of about 70 μV/deg, for Bi₈₇Sb₁₃. The dependence of the thermoelectric power on Sb concentration agrees with the model put forward to explain the transport properties of bulk Bi-Sb alloys. An empirical model has been proposed to relate the state of mixing with the measured thermoelectric power.&lt;/p></dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Doctor of Philosophy (PhD)</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Electrical and Electronics</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Electrical and Electronics</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">Ion Beam Mixing and Thermoelectric Characteristics of Bi-Sb Thin Film Alloys</dim:field>
   <dim:field mdschema="dc" element="type" lang="en_US">thesis</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>