<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T01:43:15Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/6077" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/6077</identifier><datestamp>2026-09-24T21:08:25Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor" lang="en_US">Round, G. F.</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author" lang="en_US">Hameed, Abdul</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Mechanical Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2014-06-18T16:34:06Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2014-06-18T16:34:06Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="created" lang="en_US">2010-04-14</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued" lang="en_US">1983-09</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="other" lang="en_US">opendissertations/1411</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="other" lang="en_US">2282</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="other" lang="en_US">1275367</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/6077</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/15012</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">&lt;p>This thesis presents the results of pulsing flow experiments on solid-liquid suspensions. Specifically, the hydraulic energy requirement in pulsing flows for a given slurry flowrate is compared with the steady state energy consumption for the same flowrate. It is also shown theoretically that, for the same time-averaged flowrate as in the steady state case, it is feasible to reduce the time-averaged pressure gradient and hence power requirement by pulsing.&lt;/p> &lt;p>The following five different types of flow systems were the subject of study: water, bentonite clay water, fine sand water, fine sand bentonite clay water and coarse sand water.&lt;/p> &lt;p>For the above five types of flow systems the following pertinent flow variables were studied: pulsation frequency, pulsation amplitude, average slurry velocity, solids volume concentration, mean particle size and the presence of a small amount of ultra fine particles in coarse solid liquid mixtures.&lt;/p> &lt;p>The experimental results of pulsing flow of water alone indicated that the pulsing to steady state power ratio (Jᴘ/Js) was always greater than unity indicating that for a Newtonian fluid the hydraulic energy in pulsing flow is greater than the steady flow, the increase of energy being used to maintain pulsation.&lt;/p> &lt;p>Results of pulsing flow experiments with bentonite slurry have indicated that the power ratio (Jᴘ/Js) was observed to be less than unity for certain combinations of frequency, amplitude and slurry velocity. The minimum value of (Jᴘ/Js) found was about 0.75 at a frequency of about 0.80 Hz, amplitude of 51 mm and velocity of 1.9 m/s.&lt;/p> &lt;p>In the ranges investigated, results with sand-water slurries have indicated that the power ratio (Jᴘ/Js) was a function of the variables listed above. The minimum value of the power ratio (Jᴘ/Js) for sand water slurries was found to be about 0.50 at the following values of the variables: pulsation frequency 0.45 Hz, amplitude 32 mm, slurry average velocity 1.8 m/s, solids volumetric concentration 12.5% and particle size 0.47 mm.&lt;/p> &lt;p>The reduction in the power ratio in the case of pulsing flow of sand water slurries is attributed to the formation of a particle free layer near the pipe wall while the bulk of the particles flow as a plug in the middle of the annulus of the lubricating particle free layer.&lt;/p> &lt;p>In the case of bentonite clay water slurry the reduction in the power ratio is attributed to the formation of a low viscosity layer near the pipe wall. The bulk of the slurry flows as a plug in the middle of the annulus of the low viscosity layer.&lt;/p> &lt;p>Results of this thesis indicate that power consumption for transport of slurries using pulsing flow is considerably less than power required to transport the same amount of slurry by a steady flow method.&lt;/p></dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Doctor of Philosophy (PhD)</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Mechanical Engineering</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Mechanical Engineering</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">Pipeline Pulsing Flow of Slurries</dim:field>
   <dim:field mdschema="dc" element="type" lang="en_US">thesis</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>