<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T02:17:56Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/8408" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/8408</identifier><datestamp>2026-09-24T05:05:17Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor" lang="en_US">Latto, Brian</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author" lang="en_US">Joel, Brian L.</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Mechanical Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2014-06-18T16:42:49Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2014-06-18T16:42:49Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="created" lang="en_US">2010-12-03</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued" lang="en_US">1980-09</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="other" lang="en_US">opendissertations/3615</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="other" lang="en_US">4632</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="other" lang="en_US">1670739</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/8408</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/19441</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">&lt;p>This thesis is primarily concerned with the energy required to hydraulically transport sand and lime slurries in a 5.1 cm.-diameter vertical pipeline for both steady and pulsating flows.&lt;/p> &lt;p>In the steady flow experiments, three different grades of sand of average weighted diameter d = 0.66, 1.20 and 1.84 mm. were investigated. The lime flurry used had an average particle diameter of 1.8 x 10⁻³ mm. The delivered volumetric concentration C₅, the average mixture flow rate Q, and the pressure difference ΔP across the test section were measured within the Reynolds number range of 4 x 10⁴ to 2 x 10⁵.&lt;/p> &lt;p>In the pulsating flow experiments, only one grade of sand of average weighted diameter d = 1.20 mm. was investigated at frequencies of 0.22 and 0.44 cycles per second.&lt;/p> &lt;p>Two methods of predicting pressure gradient for slurry flow were attempted. The first was adapted from Newitt et. al. (1961). By comparing the measured pressure gradient i for various suspensions to those for water flowing under similar conditions iw, an excess dimensionless pressure parameter Φ was obtained. It was possible to correlate the steady flow data using Φ and another dimensionless parameter Ψ related to mixture velocity Vm, diameter ratio D/d and specific gravity of solid S. In the second method the excess pressure gradient (i-iw) is equated to the excess hydraulic head CT(S-1). The results are presented in graphical form and each method is appraised in the discussion.&lt;/p> &lt;p>The energy dissipated per unit height of the test section and mass flow rate was determined for steady and pulsating flow of suspensions. The energy ratio JP/Js at the two frequencies was obtained for low concentration slurries (Cs &lt; 8.0%). It was found that no energy savings were recorded for pulsatile flow under these conditions.&lt;/p></dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Master of Engineering (ME)</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Mechanical Engineering</dim:field>
   <dim:field mdschema="dc" element="subject" lang="en_US">Mechanical Engineering</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">Hydraulic Transport of Sand and Lime Slurries in a Vertical Pipeline</dim:field>
   <dim:field mdschema="dc" element="type" lang="en_US">thesis</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>