<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet type="text/xsl" href="static/style.xsl"?><OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd"><responseDate>2026-11-21T02:02:38Z</responseDate><request verb="GetRecord" identifier="oai:macsphere.mcmaster.ca:11375/8776" metadataPrefix="dim">https://prod-ms-be.lib.mcmaster.ca/server/oai/request</request><GetRecord><record><header><identifier>oai:macsphere.mcmaster.ca:11375/8776</identifier><datestamp>2026-09-24T21:50:11Z</datestamp><setSpec>com_11375_271</setSpec><setSpec>col_11375_272</setSpec></header><metadata><dim:dim xmlns:dim="http://www.dspace.org/xmlns/dspace/dim" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:doc="http://www.lyncode.com/xoai" xsi:schemaLocation="http://www.dspace.org/xmlns/dspace/dim http://www.dspace.org/schema/dim.xsd">
   <dim:field mdschema="dc" element="contributor" qualifier="advisor" lang="en_US">Weatherly, G.C.</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="advisor" lang="en_US">Emesh, I.</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="author" lang="en_US">Madsen, Lynnette D.</dim:field>
   <dim:field mdschema="dc" element="contributor" qualifier="department" lang="en_US">Materials Science and Engineering</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="accessioned">2014-06-18T16:43:56Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="available">2014-06-18T16:43:56Z</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="created" lang="en_US">2011-03-08</dim:field>
   <dim:field mdschema="dc" element="date" qualifier="issued" lang="en_US">1994-06</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="other" lang="en_US">opendissertations/3952</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="other" lang="en_US">4969</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="other" lang="en_US">1859365</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">http://hdl.handle.net/11375/8776</dim:field>
   <dim:field mdschema="dc" element="identifier" qualifier="uri">https://doi.org/10.71548/11012</dim:field>
   <dim:field mdschema="dc" element="description" qualifier="abstract" lang="en_US">&lt;p>This project focused on advancing the knowledge of chemical vapour&lt;br />deposition (CVD) PbTiO₃ thin films for future work on lead zirconate titanate or PZT&lt;br />(PbZrᵪT₁_ᵪO₃) through an understanding of the structural, chemical and electrical&lt;br />properties of the material.&lt;/p> &lt;p>A study of the individual oxides, TiO₂ and PbOᵪ, prepared also by CVD, was&lt;br />made using transmission electron microscopy (TEM), scanning electron microscopy&lt;br />(SEM), Raman spectroscopy and x-ray diffraction (XRD), before a low pressure, low&lt;br />temperature process for PbTiO₃ was developed. The major factors in controlling the&lt;br />film composition and thickness uniformity were identified. The formation sequence&lt;br />for CVO PbTiO₃ films involved individual oxides of Ti and Pb, rather than&lt;br />pyrochlore-type phases. A Pb-rich composition ensured the formation of perovskite,&lt;br />however it resulted in the formation of a thin PbOᵪ surface layer. Removal of this&lt;br />layer by etching gave improved electrical properties. Capacitance measurements&lt;br />typically varied less than 1% over the frequency range and gave ε' values from&lt;br />60-155. At 1 kHz, tan δ was ~0.01 and the resistivity was ~10¹¹Ω.cm.&lt;/p> &lt;p>TEM examination of as-deposited films of PbTiO₃ revealed no macro-domains existed. After post-deposition annealing twinned structures acting as domains were&lt;br />found in grains, ~0.1 μm in size. The origin of the theoretical minimum grain size&lt;br />for twinning in PbTiO₃ thin films is discussed. A classification scheme for domain structures was developed based on thin films of PbTiO₃ and PZT. Similarities were&lt;br />drawn between these domain structures and their bulk counterparts.&lt;/p> &lt;p>The multi-layered bottom electrode of Pt and Ti used in this study was found&lt;br />to react at temperatures ≤515°C. At higher temperatures (698°C), the Ti layer was&lt;br />completely consumed, however the top surface of the Pt layer remained unaffected.&lt;/p></dim:field>
   <dim:field mdschema="dc" element="description" qualifier="degree" lang="en_US">Doctor of Philosophy (PhD)</dim:field>
   <dim:field mdschema="dc" element="title" lang="en_US">The Properties of Lead Titanate Thin Films produced by Chemical Vapour Deposition</dim:field>
   <dim:field mdschema="dc" element="type" lang="en_US">thesis</dim:field>
   <dim:field mdschema="others" element="access-status">open.access</dim:field>
</dim:dim></metadata></record></GetRecord></OAI-PMH>